Quasar CM-3211 Series Instalační příručka Strana 1

Quasar CM-3211 Series Quasar CM-4221 Series Mini-Dome Camera User and Installation Guide Rev C June 2014 DVTEL INC

Document Information ix To help ensure safety and to help reduce risk of injury or damage, observe the following: Warning: 1. The camera cov

Configuration and Operation 89 Suppose the displayed image of the camera is shown as follows. Figure 80: View-1 (Source) To rotate the image v

Quasar CM-3211/CM-4221 Series User and Installation Guide 90  Main Profile (MP) This profile provides improved picture quality at reduced bandwi

Configuration and Operation 91 Compression Information Setting Select the checkbox to display compression information on the Home page. Click Sa

Quasar CM-3211/CM-4221 Series User and Installation Guide 92 7.4.4 Video Frame Rate From the Video Frame Rate screen, you can specify the frames

Configuration and Operation 93 7.4.5 Video Mask From the Mask screen, you may select up to five rectangular portions of the View Area to ‘Mask.

Quasar CM-3211/CM-4221 Series User and Installation Guide 94 7.4.6 Audio From the Audio screen you can select the Transmission Mode, Server Gain,

Configuration and Operation 95 Note: Latitude does not support G.726 bit rates. Click Save to confirm the settings. Recording to Storage Thi

Quasar CM-3211/CM-4221 Series User and Installation Guide 96 7.5.1 Exposure The exposure is the amount of light received by the image sensor and

Configuration and Operation 97 Auto Mode There are three settings within Auto Mode:  Auto Iris Min Shutter Speed – When selecting this mode, t

Quasar CM-3211/CM-4221 Series User and Installation Guide 98  Shutter Priority – When selecting this mode, a fixed exposure is set, while other

Quasar CM-3211/CM-4221 Series User and Installation Guide x Caution: To avoid damage from overheating or unit failure, assure that there is suf

Configuration and Operation 99 Gain A nominal video signal level is usually 1 volt peak-to-peak for composite video, 0.7 volts for component or

Quasar CM-3211/CM-4221 Series User and Installation Guide 100  Manual – In this mode, you can manually change the white balance value. You can s

Configuration and Operation 101 7.5.4 Backlight The Backlight Compensation function prevents the center object from being too dark in surroundi

Quasar CM-3211/CM-4221 Series User and Installation Guide 102 7.5.6 IR Function The IR Function setting activates two functions:  On the CM-32

Configuration and Operation 103 Figure 93: Camera Settings Screen – IR Function 7.5.7 WDR Function The Wide Dynamic Range (WDR) function resol

Quasar CM-3211/CM-4221 Series User and Installation Guide 104 7.5.8 Noise Reduction Different level options for 3D Noise Reduction (3DNR) include

Configuration and Operation 105 7.5.9 TV System Select the video format that matches your TV system: 25 fps (PAL) or 30 fps (NTSC). Press <√

Quasar CM-3211/CM-4221 Series User and Installation Guide 106 7.6 Logout Selecting the Logout tab in the navigation bar closes the session. The f

Appendices 107 8 Appendices  Technical Specifications  Device Search Software  Internet Security Settings  Install UPnP Components  De

Quasar CM-3211/CM-4221 Series User and Installation Guide 108 A.1. Technical Specifications Camera Image Sensor 1/3” 1280 x 1024 CMOS Effective P

Overview 1 2 Overview The Quasar CM-3211 Series IP Mini-Dome Camera provides real-time, 720p, H.264 multi-streaming with the highest quality ima

Technical Specifications 109 Analytics Motion Detection On/Off, plus sampling pixel interval, detection level, sensitivity level, and time inter

Quasar CM-3211/CM-4221 Series User and Installation Guide 110 Physical Dimensions CM-3211/4221-00 CM-3211/4221-01 CM-3211/4221-1x 149 x 131 mm (5

Device Search Software 111 A.2. Device Search Software A.2.1 Initial Camera Configuration To perform the initial camera configuration: 1. Unpa

Quasar CM-3211/CM-4221 Series User and Installation Guide 112 Tip: A camera setup adapter, such as Veracity Pinpoint, can be used to connect a la

Device Search Software 113 3. In the Device Search application, click the Device Search button. See Figure 99: Device Search Application. 4. I

Quasar CM-3211/CM-4221 Series User and Installation Guide 114 7. Right-click and select Browse to directly access the camera via a web browser. T

Device Search Software 115 10. If the wizard appears for installing the component application DCViewer, follow the instructions to complete the

Quasar CM-3211/CM-4221 Series User and Installation Guide 116 A.3. Internet Security Settings If ActiveX control installation is blocked, either s

Internet Security Settings 117 ActiveX Controls and Plug-in Settings To create a custom level: 1. Start Internet Explorer (IE). 2. From the

Quasar CM-3211/CM-4221 Series User and Installation Guide 118 A.4. Install UPnP Components Follow the instructions below to enable UPnP so that th

Quasar CM-3211/CM-4221 Series User and Installation Guide 2 2.1 Features Following are key features of the CM-3211/4221 series cameras:  H.264

Install UPnP Components 119 5. Expand the Home or Work node, select Turn on network discovery. 6. Click Save Changes. Note: Network dis

Quasar CM-3211/CM-4221 Series User and Installation Guide 120 A.5. Deleting the Existing DCViewer Users who have previously installed the DCViewer

Deleting Temporary Internet Files 121 A.6. Deleting Temporary Internet Files To improve browser performance, it is recommended to clean up all o

Quasar CM-3211/CM-4221 Series User and Installation Guide 122 A.7. Connecting Leads to a Spring Clamp Terminal Block The unit is delivered with tw

Mounting Accessories 123 A.8. Mounting Accessories The following mounting accessories are available from DVTEL for installation of your Quasar C

Quasar CM-3211/CM-4221 Series User and Installation Guide 124 Image Name Description CX-ARMX-1 Long Arm Bracket CX-CRNR-0 Corner Bracket fits CX

Mounting Accessories 125 Image Name Description CX-PIPE-1 Long Pipe straight tube (19.7") for pendant mount. CX-POLE-0 Pole-Mount Bracket

Quasar CM-3211/CM-4221 Series User and Installation Guide 126 Contacting DVTEL DVTEL Inc. is a multiple award-winning market leader in the develop

Overview 3 2.2 Package Contents Before proceeding, please check that the box contains the items listed here. If any item is missing or has de

Quasar CM-3211/CM-4221 Series User and Installation Guide 4 2.3 Typical CM-3211/4221 Series Camera The figure below shows a typical CM-3211/4221

Introduction to the CM-3211/4221 Series IP Mini-Dome Camera 5 3 Introduction to the CM-3211/4221 Series IP Mini-Dome Camera This chapter provides

Quasar CM-3211/CM-4221 Series User and Installation Guide 6 3.2 CM-3211/4221-01 Outdoor Camera Dimensions The CM-3211/4221-01 Varifocal IP Outdoo

Introduction to the CM-3211/4221 Series IP Mini-Dome Camera 7 3.4 Camera Connections Figure 6 shows the various connectors and Reset button conta

Document Information i Table of Contents 1 Document Information ...

System Requirements 9 4 System Requirements To access the camera via a web browser, ensure that your PC has the proper network connection and me

Installation 11 5 Installation Follow the instructions below for indoor and outdoor installation of the Quasar CM-3211/4221 series camera. Relat

Quasar CM-3211/CM-4221 Series User and Installation Guide 12 5.3 Power and Ethernet Cable Connection Power Connection Make sure the camera’s powe

Installation 13 6. Mark the unit requiring IP assignment. Figure 7: Discovered IP Devices 7. Right-click on the mouse and select the assigned

Quasar CM-3211/CM-4221 Series User and Installation Guide 14 5.5 Removing the Base Plate To remove the base plate: 1. If you have not already re

Installation 15 5.6 Mounting Instructions The following are mounting instructions for the CM-3211/4221 series cameras.  CM-3211/4221-10-I and

Quasar CM-3211/CM-4221 Series User and Installation Guide 16 c) Fully insert the supplied anchors into drilled holes. You may need to tap them fl

Installation 17 5. Plug the Cat 5 cable into the camera’s Ethernet port and, if needed, plug the power terminal block into the power terminals.

Quasar CM-3211/CM-4221 Series User and Installation Guide 18 • For bracket, pole and pendant installations: a) Thread the power and Ethernet cab

Quasar CM-3211/CM-4221 Series User and Installation Guide ii 7.3.2 Security ...

Installation 19 6. If applicable, wire the Alarm In, Alarm Out, Audio In, and Audio-Out terminal blocks to external devices. See Figure 6: CM-3

Quasar CM-3211/CM-4221 Series User and Installation Guide 20 6 Using the DNA Utility to Search and Access the Camera 6.1 Introduction The DVTEL

Using the DNA Utility to Search and Access the Camera 21 5. If there are devices located on a separate VLAN, the devices must be added manually.

Quasar CM-3211/CM-4221 Series User and Installation Guide 22 6.5 Context Menu All functions on the Navigation Bar are also accessible from the co

Using the DNA Utility to Search and Access the Camera 23 5. To continue, click Allow Access. Latitude users should consult the Latitude Installat

Quasar CM-3211/CM-4221 Series User and Installation Guide 24 8. To access DNA, do one of the following: a) For DHCP (not supported by Latitude):

Using the DNA Utility to Search and Access the Camera 25 b) If the Information Bar (just below the URL bar) prompts for permission to install the

Quasar CM-3211/CM-4221 Series User and Installation Guide 26 6.7 Adjusting and Framing-Up the Camera View After the camera is connected to the ne

Using the DNA Utility to Search and Access the Camera 27 7. To achieve optimum focus results during daytime, go to the Camera > Exposure scree

Document Information iii 7.6 Logout ...

Configuration and Operation 29 7 Configuration and Operation The Quasar CM series camera is provided with a browser-based configuration interfac

Quasar CM-3211/CM-4221 Series User and Installation Guide 30  At the top of the Viewer Window is the Navigation Bar, which contains five main ta

Configuration and Operation 31 7.2 Home Page The CM-3211/4221 series includes two types of cameras. One type features a variable focus (varifoc

Quasar CM-3211/CM-4221 Series User and Installation Guide 32 o Snapshot Press this button to automatically save the JPEG snapshots in the specif

Configuration and Operation 33 Push AF Press the Push AF button once to adjust zoom or focus. Wide Step/Tele Step Press the

Quasar CM-3211/CM-4221 Series User and Installation Guide 34 7.3 System-Related Settings The figure below shows all categories under the System t

Configuration and Operation 35 7.3.1 System Click the System tab in the sidebar. The System page is displayed in Figure 30: System Screen. It i

Quasar CM-3211/CM-4221 Series User and Installation Guide 36 7.3.2 Security Clicking the category Security in the System sidebar opens a drop-dow

Configuration and Operation 37 7.3.2.1 User Click the User tab in the Security category on the sidebar to display user credentials. Figure 32:

Quasar CM-3211/CM-4221 Series User and Installation Guide 38 Manage User  To delete a user, pull down the user list and select the user name to

Quasar CM-3211/CM-4221 Series User and Installation Guide iv List of Figures Figure 1: Package Contents...

Configuration and Operation 39 HTTPS allows secure connections between the camera and web browser using Secure Socket Layer (SSL) or Transport L

Quasar CM-3211/CM-4221 Series User and Installation Guide 40 To create a certificate request: 1. Click Create Certificate Request to create and

Configuration and Operation 41 To provide the certificate information: To create a self-signed HTTPS certificate or a Certificate Request to CA,

Quasar CM-3211/CM-4221 Series User and Installation Guide 42 5. Provide the requested information to install a self-signed certificate for the ca

Configuration and Operation 43 Enable IP Filter 1. Check the box to enable the IP Filter function. Once enabled, the listed IP addresses (IPv4)

Quasar CM-3211/CM-4221 Series User and Installation Guide 44 Settings  Identity – Enter the user identity associated with the certificate. Up to

Configuration and Operation 45 7.3.3 Network From the System screen, click the Network tab. A drop-down menu appears with tabs including Basic

Quasar CM-3211/CM-4221 Series User and Installation Guide 46  Use fixed IP address The camera’s default setting is Use fixed IP address. Refer t

Configuration and Operation 47 7.3.3.2 QoS (Quality of Service) QoS provides differentiated service levels for different types of traffic packe

Quasar CM-3211/CM-4221 Series User and Installation Guide 48 7.3.3.3 SNMP Settings The Simple Network Management Protocol (SNMP) enables the came

Document Information v Figure 60: Tampering Alarm Screen ...

Configuration and Operation 49 To enable the SNMP v3 protocol, enter the appropriate data and passwords requested:  Enable SNMP v3 – Select th

Quasar CM-3211/CM-4221 Series User and Installation Guide 50 7.3.3.4 UPnP The UPnP page enables the Universal Plug-and-Play protocol on your netw

Configuration and Operation 51  Enable UPnP port forwarding – When UPnP port forwarding is enabled, the camera is allowed to open the web serv

Quasar CM-3211/CM-4221 Series User and Installation Guide 52 7.3.5 Mail The Administrator can send an e-mail via Simple Mail Transfer Protocol (S

Configuration and Operation 53 7.3.6 FTP The Administrator can send an alarm message to one or two File Transfer Protocol (FTP) sites when moti

Quasar CM-3211/CM-4221 Series User and Installation Guide 54 7.3.7 HTTP An HTTP notification server detects notification messages of triggered ev

Configuration and Operation 55 7.3.8 Application The Application screen enables control over the input and output alarms. If, for example, an

Quasar CM-3211/CM-4221 Series User and Installation Guide 56 Triggered Action The Administrator can specify various alarm actions to be taken when

Configuration and Operation 57  Upload Image by FTP – As seen in the figure below, select this box to assign an FTP site and configure the par

Quasar CM-3211/CM-4221 Series User and Installation Guide 58  Send HTTP notification – Check this box to specify the destination HTTP address an

Quasar CM-3211/CM-4221 Series User and Installation Guide vi Revision History Version Date Author Comments A October 2013 Jonathan Herman Alan Si

Configuration and Operation 59 7.3.9 Motion Detection The motion detection function detects suspicious motion and triggers alarms when motion v

Quasar CM-3211/CM-4221 Series User and Installation Guide 60 For instructions how to set a schedule for motion detection, refer to Schedule. Below

Configuration and Operation 61 When motion is detected, the signals are displayed in the Motion window shown below. Detailed settings for mot

Quasar CM-3211/CM-4221 Series User and Installation Guide 62  Upload Image by FTP – Select this box in order to upload an image to a designated

Configuration and Operation 63 7.3.10 Network Failure Detection The network failure detection function allows the IP camera to periodically ping

Quasar CM-3211/CM-4221 Series User and Installation Guide 64 Triggered Action The Administrator can specify various alarm actions to be taken when

Configuration and Operation 65 Detection of camera tampering is achieved by measuring the differences between the older frames of video (which a

Quasar CM-3211/CM-4221 Series User and Installation Guide 66  Upload Image by E-Mail – Selecting this option enables you to assign an e-mail add

Configuration and Operation 67 Figure 61: Storage Management Screen Device information Upon inserting the microSD/SDHC card, card information,

Quasar CM-3211/CM-4221 Series User and Installation Guide 68 Figure 62: Video File Recording List  Remove – To remove a file, first select th

Document Information vii 1 Document Information Document Scope and Purpose The purpose of this document is to provide instructions and installa

Configuration and Operation 69 7.3.13 Recording In the Recording screen, specify the recording schedule. Select one of three options:  Disabl

Quasar CM-3211/CM-4221 Series User and Installation Guide 70 7.3.14 Schedule The Schedule screen is used by the network failure detection, tamper

Configuration and Operation 71 7.3.15 File Location From the File Location page, specify a storage location for snapshots and web recordings. Th

Quasar CM-3211/CM-4221 Series User and Installation Guide 72 7.3.16 View Information Clicking the View Information tab in the System screen opens

Configuration and Operation 73 7.3.16.2 User Information The Administrator can view each user’s login information and privileges in the User inf

Quasar CM-3211/CM-4221 Series User and Installation Guide 74 In the screen above, the user Admin is granted privileges of I/O access, Camera contr

Configuration and Operation 75 7.3.17 Factory Default The Factory default page is shown below. Follow the instructions to reset the camera to fa

Quasar CM-3211/CM-4221 Series User and Installation Guide 76 Reboot Clicking Reboot restarts the system without changing current settings. 7.3.18

Configuration and Operation 77 To upgrade the firmware: 1. In the Step 1 text box, click Browse and select the binary file to be uploaded, for

Quasar CM-3211/CM-4221 Series User and Installation Guide 78 7.3.20 Maintenance You can export configuration files to a specified location and ret

Quasar CM-3211/CM-4221 Series User and Installation Guide viii Disclaimer Users of DVTEL products accept full responsibility for ensuring the sui

Configuration and Operation 79 7.4 Video and Audio Streaming Settings Select the Streaming tab in the navigation bar at the top of the page to

Quasar CM-3211/CM-4221 Series User and Installation Guide 80 Figure 78: Video Format Screen 7.4.1.1 CM-3211 NTSC Video Resolution Settings The f

Configuration and Operation 81 H.264 + H.264 Video Resolution (NTSC): H.264-1 H.264-2 BNC Support 1280 x 1024 (30fps) 1280 x 1024 (15fps) √ 12

Quasar CM-3211/CM-4221 Series User and Installation Guide 82 7.4.1.2 CM-3211 PAL Video Resolution Settings The following tables are video resolut

Configuration and Operation 83 H.264 + H.264 Video Resolution (PAL): H.264-1 H.264-2 BNC Support 1280 x 1024 (25fps) 1280 x 1024 (13fps) √ 1280

Quasar CM-3211/CM-4221 Series User and Installation Guide 84 7.4.1.3 CM-4221 NTSC Video Resolution Settings The following tables are video resolu

Configuration and Operation 85 H.264 + H.264 Video Resolution (NTSC): H.264-1 H.264-2 BNC Support 1920 x 1080 (30 fps) 720 x 480 (30fps) √ 640

Quasar CM-3211/CM-4221 Series User and Installation Guide 86 H.264-Only Video Resolution (NTSC): H.264 BNC Support 19

Configuration and Operation 87 H.264 + H.264 Video Resolution (PAL): H.264-1 H.264-2 BNC Support 1920 x 1080 (25fps) 1920 x 1080 (25fps) √ 720 x

Quasar CM-3211/CM-4221 Series User and Installation Guide 88 H.264-Only Video Resolution (PAL): H.264 BNC Support 192